back to Subzero Cooldown Software

 

Startup

This window comes up when the software first starts. 

 

If the DAQ modules are present as they should be, then the "Present" column will have X's in each box.  If not, then run the NiMax software to see what modules are present or to fix their names. 

 

You may set the Start time so that the Time Since Start will show properly at the top of the main window.  Click the Change button.

This will also allow the graphs to show Time Since Start rather than current time or time since the software was started.  Start Time is not saved to the text file, because it might not be accurate, and because it can also be very easily derived from current time.  Since all documentation should be recorded using current time, that number shows prominently at the top of the main window.

 

Click Start to exit the Startup window and begin data aquisition.

 

Setup

Once the software is running, click Setup at the top for additional settings.